HP Envy x360 13-aq0000 Disassembly

In this tutorial, I will show you how to disassemble an HP Envy X360 13-aq0000 series Convertible PC. I will remove the bottom cover, battery, SSD, WiFi card, heatsink, and CPU fan.

This guide will work for many different models of HP Spectre x360 13 Convertible PCs (model numbers 13-AQ0000 through 13-AQ10000): HP Envy X360 13-aq0005nr, 13-aq0007ca, 13-aq0008ca, 13-aq0011ms, 13-aq0044nr, 13-aq0045cl, 13-aq0051ms, 13-aq0077nr, 13-aq1001ca, 13-aq1007ca, 13-aq1008ca, 13-aq1010ca, 13-aq1010nr, 13-aq1020ca, 13-aq1030ca, 13-aq1040ca, 13-aq1050ca, 13-aq1075nr, 13-aq1076nr, 13-aq1175cl, 13-aq1185nr, 13-aq1195nr and probably some other models too.

For this disassembly, you will need only four basic tools: a Torx T5 screwdriver, a Phillips #1 screwdriver, a case opener tool, and tweezers.

Here are some HP Envy X360 13-aq0000 Features:
The laptop only has one M.2 SSD slot.
The RAM is soldered to the motherboard.
The cooling fan and heatsink are removable.
The keyboard is attached to the top cover.

Teardown is what we do! Follow us on Facebook for the latest repair news.

Remove the back cover

Like most laptops, envy 13 can see the internal structure of the fuselage just by removing the back cover, which is not difficult to disassemble.
First, remove all visible screws from the back cover.
Five silver screws are hidden under the self-adhesive rear bottom foot. Peel off the foot to access the screws.

When removing the rear cover, it should be noted that there are only two screws on the back cover. In fact, most of the screws are hidden under the foot pads. Use double-sided adhesive tape to fix it. You need to be careful when tearing it off, and then remove the row of screws under the foot pad.

After removing the screws, use a case opener tool to slowly lift the back cover from the edge of the fuselage. Then, you can see the components inside the fuselage. To be honest, thin and light notebooks are easier to disassemble than traditional notebooks, so it is very easy to clean the dust and upgrade the M.2 SSD, wireless network card and battery.

After successfully removing the back cover, you can see that although it saves space, this HP notebook is full of internal space. But at the same time, its layout is not messy, and it is obviously carefully designed. It is no wonder that ENVY 13 can be so thin and light at the same time with strong performance. It is only 14.7mm thick, as light as 1.2Kg

Remove the battery

To prevent accidents, we must take care to prevent the generation of static electricity before disassembly. In addition to wearing gloves, we must also unplug the battery cable from the motherboard.

Remove all screws attaching the battery to the top case assembly. You can easily remove the battery.
We can see that the ENVY 13 is equipped with a 53Wh large-capacity battery. This battery capacity is considered a large capacity in a 13-inch notebook, which is why it can achieve a long battery life of 16.5 hours. In short, whether on the go out or on a business trip, a strong battery notebook always gives us more confidence and helps us work more stably and efficiently. HP ENVY 13 can be said to meet the needs of professionals in the office fully. It also supports fast charging technology, which can charge 50% of electricity in 45 minutes, so that business people no longer have to worry about falling into the dilemma of insufficient power.

Remove the CPU fan and heatsink

Remove six screws securing the heatsink.
Remove one screw securing the CPU fan and disconnect the fan cable from the motherboard.

It uses a wide and thick single copper tube heat sink. The CPU and GPU are connected in series. A fan draws cold air from the bottom of the fuselage into the fuselage and discharges the heat from the LCD hinges. This is a more conventional heat dissipation design. The advantage is that it can conduct heat from the hardware in a timely and efficient manner, further accelerate the conduction of heat, and ensure the stability of the temperature inside the fuselage.