TeardownXiaomi Mi NoteXiaomi Mobile Phone
Xiaomi Mi Note Teardown
In this guide, I’ll explain how to disassemble the Xiaomi Mi Note to remove the back cover, battery, rear camera, front camera, speaker, and motherboard.
Want to keep in touch with us? Follow us on Facebook for more repair news.
Xiaomi Mi Note uses curved glass to give it a graceful edge. It’s actually having glass fronts on both sides, use a guitar picks pry up the back cover.
The back cover uses 3D curved glass, and it’s fixed by snaps.
The Xiaomi Mi Note supports dual cards and dual standby.
Remove all screws securing the metal shield.
Once the metal shield is removed, you can access the motherboard.
Remove the screws securing the sound chamber module.
The Xiaomi Mi Note uses smart sound amplification technology, which produces better sound and sound quality than other phones.
Now, pull the double-sided adhesive tape, and you can remove the battery.
Xiaomi Mi Note comes with a 4.4v, 2900mah Li-polymer battery. Battery cells come from LG.
The battery caddy is made of magnesium alloy.
The board is integrated a micro USB port, microphone, virtual keys light and a vibrator.
The microphone and the virtual key light
All chips were covered by metal shields.
On the front panel, we found a small device – a light-refracting prism.
The rear camera and front camera
OIS Optical Image Stabilizer lens thickness of 5.08mm, it is the thinnest, and with two ISP chips.
Remove all metal shields on the motherboard.
ESS ES9018K2M 32-bit Stereo Mobile Audio DAC and TI OPA1612 Operational Amplifier
This set of audio chips is currently the most high-end chip in smartphones
Samsung 3GB RAM + 2.5GHz Qualcomm Snapdragon 801 processor
Qualcomm PM8941 Power management chip
Qualcomm PM8841 Power management chip
Dual SIM Card slots, it supports the microSIM card and nanoSIM card
Qualcomm WCD9320 Audio decoder chip
Qualcomm QFE1100 Envelope Tracking Chip
Qualcomm WTR1625L RF Transceiver supports GPS and China Beidou Navigation Satellite System.
AVAGO ACP7600 RF power amplifier
Skyworks 85709-11 5GHZ Wi-Fi chip
Qualcomm WCN3680 Bluetooth 4.0 chip
For more information and guide, please go to Xiaomi Mi Note device page.
Source: it168
Hi I just bought a mi note 64gb with water damage. The phone turns on and operates with few errors.
It only things issues I have found are…
1. The external speaker does not work. No sound at all. The ear piece on calls works and the head phone jack works.
2 the flash/ torch dosent work. The LEDs show no sign of life.
3 The vibration does not work.
4 The main camera is intermittent. The camera app crashes on opening most of the time. If I open Google camera app then dismiss the error and open the mi camera app it usually works. If I take a picture with the main camera then go to view the picture, the app will crash on return to camera. The front camera works all the time, for example using a selfie app.
Every thing else, display, touch, WiFi , calls, mic, ect works.
The purpose of me asking is to help identify where on the mother board damage may cause these errors. I understand it may be damage to the internals of a chip. I have already tried to clean the mother board with a toothbrush and 99% alcohol.
Any ideas are welcome thanks.
Hi, great experiment there. Could you tell how to open or replacing the on/off button flexible? I can remove the top case but I’m stuck at removing the button from the bezel. Should I tear down the screen also?
I think you should remove the back cover, battery and motherboard to replace the on/off button module.