ZTE Nubia Z9 Max Teardown

In this guide, I’ll explain how to disassemble the Nubia Z9 Max to remove the back cover, battery, speaker, rear camera, front camera, and motherboard.

Want to keep in touch with us? Follow us on Facebook for more repair news.

Heat up the back cover with a heat gun for 2-3 minutes.

Open the back cover with a sucker.

The back cover was covered by black cooling stickers, and the motherboard was covered by a black fixed plate.

The main camera is equipped not only with high-transparency glass but also with dustproof cotton.

The battery power cable is fixed by a metal sheet.

Remove the bottom speaker.

Nubia Z9 Max speaker module

Remove the screws securing the motherboard.

The motherboard was removed.

Virtual LED light button

3.5mm headphone jack

micro USB jack

Remove the battery.

Nubia Z9 Max comes with a 3.84V, 3000MAH Li-polymer battery.

The front camera and rear camera

All the chips were covered by metal shields.

Qualcomm Snapdragon 810 processor
Qualcomm pmi8994 power management chip
Skyworks RF chip
TriQuint TQP9051 multi-frequency amplifier chip

Qualcomm WCD9930 audio decoder chip
Samsung eMMC5.0 ROM
20795P1 KML1G
Qualcomm PMI8994 power management chip
SIMG 8620B0

Qualcomm Snapdragon 810 + Samsung 3GB RAM

Qualcomm pmi8994 power management chip

Samsung 16GB eMMC5.0 ROM

For more guides, check out the Nubia Z9 Max device page.

Source: it168