Meizu Pro 5 Teardown

In this guide, I’ll explain how to disassemble the Meizu Pro 5 to remove the display assembly, battery, camera, and motherboard.

Looking for more guides? Follow us on Facebook for all the latest repair news.

The first step is removing two screws from the bottom. After removing the screws, use a suction cup to remove the display assembly from the phone body.

The Meizu PRO 5 motherboard and display assembly are covering a lot of copper foil. The processor is also covered with thermal grease.

Disconnect the LCD cable and fingerprint module cable. The display assembly can be removed.

The Meizu PRO 5 features a Super AMOLED screen with a magnesium alloy plate on the back of the screen. This reduces the risk of a broken screen when the phone is accidentally dropped.

5MP front camera

Fingerprints company’s FPC 1155 fingerprint modules

mBack key

The motherboard covers a large number of metal shields.

Meizu PRO 5 supports mCharge 2.0. It comes with a 3000mAh battery.

USB Type-C port

Remove the dam-board. You can see the speaker’s sound chamber.

Rear camera, flash, and headphone jack

Meizu PRO 5 uses a 2116W pixel Sony IMX230 sensor, which is Sony’s high-end sensor.

Meizu PRO 5’s headphone jack can be compatible with 5-pin and 4-pin headphones.

For more guides, check out the Meizu Pro 5 device page.