Asus Mobile Phone Asus ZenFone Zoom

Asus ZenFone Zoom Teardown

David December 6, 2024

0 2 minutes read

In this guide, I’ll explain how to disassemble the Asus ZenFone Zoom to remove the back cover, speaker, battery, camera, and motherboard.

Want to be the first to see inside the latest gadgets? Follow us on Facebook for the latest news from MyFixGuide.com.

Powered off the phone, we started to separate the back cover from the back of the lower left corner and opened the back cover with nails.

With the snap-rattling sound, it is very easy to remove the back cover.

The back cover was removed.

Some people worry that the phone fuselage connected to the back cover is not strong enough; when the phone falls down, the back cover will be separated.
The back cover has eighteen snaps. They used to fix the back cover on the phone fuselage, so please do not worry.

Remove all screws securing the middle frame.

After all the screws are removed, remove the middle frame, so you can access the internal components.

After successfully removing the middle frame, you can see that the internal design is very symmetrical and beautiful. More importantly, we see the phone’s camera module. It is much larger than we thought.

There are sixteen screws securing the middle frame.

Remove the flash and laser autofocus module.

Uncover the flexible printed circuit. It would be able to remove the flash and laser autofocus module.

Asus ZenFone Zoom’s flash and laser autofocus module

The Asus ZenFone Zoom camera module is covered by a protective cover.

SIM slot and TF slot were fixed on the flexible printed circuit board. The board was fixed on the battery.

Asus ZenFone Zoom has a hanging hole.

We see that there is a watercolor sticker attached to the headphone jack, but the headphone jack does not seal too well, and I still worry about its tightness.

Compared to the iPhone 6 Plus’s rear camera

Disconnect the battery connector and circuit board from the motherboard.

In this step, we remove eight screws.

When the screws and cables are removed, you cannot separate the motherboard. Then we realized that we should remove the camera first.

Asus ZenFone Zoom’s camera module has three cables connected to the top of the board. The board should have an independent ISP for processing images, stabilization operations, and zoom drive.

ARM and Taiwan words written on a chip of the board, it should be an ISP.

Remove the camera module’s protective cover.

The camera module’s protective cover

Now, the motherboard can be removed.

Remove the camera module.

Asus ZenFone Zoom’s motherboard

The camera inside has up to 10 HOYA lenses.

Now, we will disassemble the camera module.
Remove six screws.

As described in the official press conference, all lenses are arranged vertically. Why so arrange it?

From this perspective, we see the interior of the zoom lever.

Remove the battery.

Just someone asked whether to replace the battery. The answer is yes. But first, you need to separate the metal shield from the battery and install it on the new battery.