Xiaomi Mi 3 Disassembly

In this guide, I’ll explain how to disassemble the Xiaomi Mi 3 to remove the back cover, battery, rear camera, front camera, speaker, Power button, screen, and motherboard. Refer to this guide. You can repair your Xiaomi Mi 3.

Looking for more funny teardown? Follow us on Facebook for all the latest repair news.

There is no screw on the back cover.

Remove the SIM card. There are two screws on the SIM card slot. Remove two screws.

Pry up and remove the back cover.

Remove eleven screws securing the middle frame to the motherboard.

Remove the middle frame. You can see the motherboard and battery.

The NFC chip is connected to the middle frame, and the NFC chip is covered on the battery.

The middle frame integrated a 3.5mm headphone jack.

Remove three screws securing the speaker module.

Speaker module

Remove two screws securing the motherboard. Disconnect three cables.

The Xiaomi Mi3 motherboard has been removed.

Handset, touch chip, light sensor, and vibrator.

ATMEL MXT540S touch chip, the chip is managing the touchscreen, identify the user’s actions.

Volume and power button cable

There are two spring contacts on the vibrator connected to the motherboard; the vibrators are fixed by double-sided adhesive.

Xiaomi Mi 3 uses a 3050mAh battery and the battery cell comes from Samsung.

The soft board integrated motherboard connector cable, USB port, microphone, and other components.

The RF cable of Xiaomi 3 is fixed with rubber strips; the rubber can insulate the signal and will not affect the signal. Secondly, the RF cable rubber strips are fixed more firmly.

Remove two cameras and metal shields.

Rear camera: 13MP Sony camera, F2.2 large aperture, 28mm wide-angle

Front Camera

RF9812 RF amplifier chip

SPRD SR3500 RF Transceiver

SPREADTRUM SC8803G5 TD-SCDMA network baseband chip

MAX77665A power management chip

INVENSENSE MPU 6050 gyroscope chip

TI 37C8311 chip

Oberthur 211808 chip

SK Hynix 2GB RAM

Nvidia Tegra 4 processor

Broadcom Wi-Fi chip