Sony Duo 13Sony LaptopTeardown

Sony Duo 13 Disassembly

In this guide, I’ll explain how to disassemble the Sony Duo 13 to remove the battery, SSD, card reader, heat sink, cooling fan, and motherboard. Refer to the guides, you can repair, upgrade and clean your Sony Duo 13.

Want to keep in touch with us? Follow us on Facebook for more repair news.

You can see we only find one screw in the bottom case, remove the screw.

There are two screws on the bottom of the screen.

The rear cover is fixed by snaps.

Remove this screw.

Remove the cover. You can find four screws. Remove these screws.

Hidden screws

Once all screws were removed, pry up the back cover.

Now you can access the battery, cooling fan, speakers, SSD, and motherboard.

Sony Duo 13 cooling fan

NFC sensor area

Motherboard

Sony Duo 13 comes with a 7.5v, 48wh Li-ion battery, Sony model: VGP-BPS36.

Left speaker

Touchpad module

Right speaker

Remove the screws securing the battery. Disconnect the battery power cable from the motherboard.

Duo 13 Li-ion battery

Remove the screws securing the card reader.

SD card reader module

Remove the screw securing the SSD.

Sony Duo 13 features Samsung 256GB NGFF SSD.

NFC chip

The cooling fan coming from Panasonic

The camera

Sony duo 13 heat sink

Source: zol.com.cn

Related Articles

6 Comments

  1. I am having WiFi problems after upgrading to Windows 8.1 and suggestions are to replace the WiFi card. Do you have vendor for the mesh screen which is taking off as everyone says once taken off that it is unusable. I called Sony and they really don’t help at all since they now don’t sell PCs anymore. I have a USB WiFi installed now which is OK, but PC won’t go into sleep mode at all. I don’t really want to take apart the PC if this won’t be easy fix. Thanks!

Leave a Reply

Your email address will not be published. Required fields are marked *

8  +  1  =