This morning, the OnePlus PJA110 was listed on the 3C certification. The device belongs to the OnePlus Ace 2 Pro, and the charging specifications of the device have been revealed.
As mentioned, the OnePlus Ace 2 Pro will use the 150W SuperVOOC charger, which carries the model number VCBEJACH. A few days ago, the same charger was listed along with the expected Realme GT Neo 6 series.
The charger supports charging in the following modes: 15W, 100W and 150W. Except for this, the 3C certification contained no other information.
As previously reported, the OnePlus Ace 2 Pro is confirmed to be powered by the Snapdragon 8 Gen 2 chipset. The chipset is based on 4nm TSMC’s 2nd-generation manufacturing process and has Cortex-X3 Super Core, Adreno 740 GPU, and Snapdragon X70 5G modem.
The OnePlus Ace 2 Pro is rumored to feature a 6.74-inch curved display that supports 1.5K resolution. The highest variant is expected to have 24GB RAM and 1TB storage. The phone has a large 5000mAh battery and supports 150W fast charging.
Also Read: Vivo Pad Air Listed on 3C Certification with 44W Charging
The Ace 2 Pro will likely feature a triple camera setup including a 50MP primary lens (probably Sony IMX890), an 8MP ultra-wide lens, and a 2MP macro lens. On the front, a 16MP selfie camera is expected to be equipped in the display punch-hole.
At the moment, there is no news about the launch of the OnePlus Ace 2 Pro. However, these listings on certification sites hint that the official launch is not far away.