This morning, two OPPO devices were listed on 3C certification. The first device has the model number PGU110, which belongs to the OPPO Find N2, while the second one carries the model number PGT110, which is not confirmed but is expected to be the OPPO Find N2 Flip.
As mentioned in the 3C certification, both devices will use OPPO’s SuperVOOC 2.0 charger, which has model number VCB7CACH and supports 67W fast charging. The charger can charge in the following modes: 10W and 30.5-67W.
Previously, it was revealed that OPPO is expected to launch its all-new Find N2 and Find N2 Flip in the upcoming INNO Day event, which is likely to happen in mid-December.
The Find N2 is expected to feature the same displays and same-sized batteries. However, a better camera setup is expected to feature the following lenses: 50MP+48MP+32MP. The chipset would probably be Snapdragon 8+ Gen 1 in addition to the MariSilicon X ISP chip.
Next, we have the Find N2 Flip, which is expected to feature a 6.8-inch primary display and a smaller 3.26-inch external display for displaying notifications and some other minor functions. It would feature a dual 50MP+8MP camera setup in which the primary lens is Sony’s IMX766, and the secondary lens is an ultra-wide lens. The battery cell would be around 4,300mAh, and the chipset might be the Dimensity 9000.
