Yesterday, the upcoming Reno6 Pro and Reno6 Pro+ were listed on TENAA certification, which revealed some main specifications and the renders of both devices. Today, another leak regarding the upcoming phone was revealed.
Recently, Digital Chat Station revealed the full specifications of both models. According to the blogger, the Reno6 Pro will have the following specifications:
- 6.55-inch curved display with 2400×1080 resolution
- Dimensions: 160×73.1×7.6mm, weight: 177g
- MediaTek Dimensity 1200 chipset (with maximum 3.0GHz frequency)
- Rear Camera: 64MP (Main) +8MP (Ultra-Wide) +2MP (Depth) +2MP (Macro)
- Front single 32MP lens
- 4500mAh dual battery with 65W SuperVOOC charging
The specifications of the Reno6 Pro+ are also mentioned below:
- 6.55-inch curved display with 2400×1080 resolution
- Dimensions: 160.8×72.5×7.99mm and Weight: 188g
- Qualcomm Snapdragon 870 chipset (with max 3.2GHz frequency)
- Rear Camera: 50MP (Main) +16MP (Ultra-Wide)+ 13MP (Telephoto) +2MP (Macro)
- Front Single 32MP lens
- 4500mAh dual battery with 65W SuperVOOC charging
There is a difference in weight and size between the two phones. The Reno6 Pro+ is a bit heavier and larger than the Reno6 Pro. The camera specifications of the two phones are also different. The Reno6 Pro+ comes with a flagship-level camera setup.
The blogger didn’t mention that both devices will feature the same single-punch design on the top left side of the OLED display. The OPPO Reno6 lineup is expected to launch in the middle of this year.
