Today, a new device with model number PGAM10 from OPPO has been listed on 3C certification, and sources are claiming that it would be Reno8 Pro. As mentioned in the certification, the Reno8 will come with an 80.3W charger out of the box.
The certification has mentioned two chargers with the following model numbers: VCB8JBCH and VCB8JACH, but both have the exact specifications and support charging at 10W (5V-2A) and 36.5W-80.3W (5-11V/7.3A).
Except for this, the certification didn’t consist of any important information. However, many specifications were already known, thanks to some major sources.
Previously, it was revealed that the Reno8 Pro will debut with the Snapdragon 7 Gen 1 chipset, specially designed for premium mid-range devices. In addition to the new chipset, the device will also feature UFS 3.1 storage and an LPDDR5 memory.
Moreover, this device has a 6.55-inch OLED display that supports Full-HD+ (2400x1080p) resolution and a 120Hz refresh rate. It would feature a triple camera (50MP+8MP+2MP) setup on the back and a 32MP selfie camera on the display’s punch-hole.
Inside the phone, there would be a 4500mAh battery with 80W charging support. The device also has an in-display fingerprint scanner. The renders of Reno8 are already surfing on the internet; click the following link to check them out.